Mounting Instructions
Home | Information | Mounting Instructions
  
WARNING!  Central Manufacturing Company is not responsible for damage caused to the shift knob, factory shifter assembly, or vehicle electrical system as a result of improper installation.  Please read carefully before proceeding with installation.

Threaded Shift Levers

1. Remove current gearshift knob from shift lever.

2. Use solvent to remove grease and dirt from shift lever.

3. Select appropriate brass insert (supplied if needed).

4. Place LOCTITE^TM blue adhesive on all threads, including the inside and outside threads of the brass insert, and the shift lever threads.

5. Screw lock nut and shift knob onto the shift lever.

6. Do not over tighten knobs on long threaded shift levers.  LOCTITE^TM adhesive and lock nut will hold knob in position.

7. Allow adhesive to dry overnight.

Non-Threaded Levers

1. Remove current shift knob from shift lever.

2. Loosen set screws on shift knob.

3. Select the appropriate nylon bushing (supplied) and insert it into the shift knob.

4. Slide shift knob with nylon bushing onto shift lever.

5. Tighten set screws evenly all the way around the knob (hand tight).